Built for residential roofers, storm restoration crews and small roofing contractors
Roofing Contract Software for Roofing Proposals and Change Orders
Get the roof replacement contract signed at the kitchen table and the decking change order signed before lunch on tear-off day. Upload the PDFs you already use, add the homeowner, and keep a dated record of what they approved.
Try one document to see it work, then $49 a month or $288 a year billed yearly for up to 3 people.
- $49/mo
- Unlimited documents, flat rate
- No account
- Homeowners sign in the browser, nothing to install
- ESIGN + UETA
- Binding e-signatures on your own contracts
- Audit trail
- Signer, time, and IP on every document
Roofing contract software lets a roofer send a roof replacement contract, repair estimate or change order to the homeowner's phone and get a legally binding signature back the same day. You upload your own contract PDF, add the homeowner, and they sign from an email or text link. You get the signed copy with a dated audit trail, and nothing is printed, scanned or left in a truck.
Roofing is a trade where the price changes after the first shingle comes off. Soft decking, a second layer nobody mentioned and rusted flashing are normal, and storm work adds an insurance adjuster who wants paper for every supplement. The roofer who has a signature on each change before the crew does the work gets paid without a dispute. SignSend charges one flat price for the signing step, so a busy hail season costs the same as a quiet winter.
What should a residential roofing contract include?
Most roofing disputes start with one of five missing lines, so write each one down. Describe the work in plain words (tear off one layer, replace 24 squares of architectural shingles, new synthetic underlayment, ice and water shield at the eaves and valleys, new drip edge and pipe boots), name the shingle brand and line, and state the total price with the payment schedule: deposit, materials delivery, balance at completion. Say who pulls the permit, who hauls the debris, and how long the manufacturer and workmanship warranties run.
Then write down what nobody can see from the driveway. Rotted decking is the classic one, so price it per sheet in the contract (for example $85 per 4x8 sheet of 7/16 OSB, installed) and say that anything beyond the allowance goes on a signed change order. Add a line for an extra hidden layer of shingles and for chimney or skylight flashing that turns out to be rusted. When the price per sheet is already signed, the call from the roof at 10 a.m. is a quick change order, not an argument. Send the finished PDF with contract signing software that records who accepted it and when.
A worked example with a storm claim and two change orders
A three-person roofing company inspects a hail-damaged house and quotes a full replacement at $14,600: 26 squares, architectural shingles, new underlayment and ridge vent, with a 10 percent deposit and the balance due when the insurer releases the second check. The owner sends the contract from the truck, the homeowner and her husband both sign on their phones that evening, and the crew orders materials the next morning.
Tear-off day finds 14 sheets of soft decking. The contract already says $85 a sheet, so the foreman uploads a one-page change order for $1,190 and the homeowner signs it before lunch. The next day the chimney flashing is rusted through and a second change order for $640 goes out the same way. The job closes with three signed records totaling $16,430, each with the signer's name, time and IP address printed into the PDF. The insurer's adjuster gets the change orders as supplements, and nobody argues about what was approved.
On SignSend Pro at $288 a year those three documents cost nothing extra, and neither do the other forty contracts the crew sends that season. Roofing CRMs that include e-signing usually price per user per month, often with onboarding fees, which makes sense when you use the whole platform and less sense when the signature is the only part you need.
Can a roofing contract be signed electronically?
Yes. A roofing contract, estimate approval or change order signed electronically is enforceable under the federal ESIGN Act (15 U.S.C. chapter 96) and the state versions of the Uniform Electronic Transactions Act, as long as the homeowner intended to sign and you keep a record of it. The audit trail SignSend prints into the final PDF is that record: who signed, when, and from which IP address.
Roofing has more state rules than most trades because so much work follows storms and insurance claims. When you sell a job at the customer's home for $130 or more, the federal FTC Cooling-Off Rule generally gives the buyer three business days to cancel and requires a written cancellation notice. Several states add roofing-specific terms for insurance work, such as a right to cancel if the claim is denied or a ban on waiving the deductible. Put those notices in the PDF you upload, so they are part of what the homeowner signs.
Roofing proposal software or a signing tool for a small crew
Roofing proposal software and roofing CRMs measure from aerial imagery, build good, better and best options from a price list, track jobs and order materials. If you run a sales team that knocks doors after every storm, that platform earns its seat price. Most of them also include signing, priced into the per-user plan.
A one-truck or two-truck company that already writes its estimate in a spreadsheet or a PDF form usually needs less. The job is to get the number in front of the homeowner, get a binding signature and keep the record. That is what SignSend does, at one flat price for the account, alongside the e-signature setup general contractors use for subcontracts and lien waivers. If you also run gutters, siding or solar, the same account covers those contracts at no extra cost. Storm crews that also clear downed trees send their removal agreements the same way, as on our tree service contract software page.
What a roofing company needs to get contracts signed
Built around how a roof job really runs, from the inspection and estimate to tear-off, supplements and final payment.
Roof replacement contracts signed on site
Send the contract with squares, materials, price, deposit and warranty terms while you are still in the driveway. The homeowner signs on a phone, so you can order materials the next morning.
Repair estimates and work authorizations
For a leak or a few missing shingles, send a one-page authorization with the price and scope. A signed approval before you climb the ladder ends the debate about what the repair included.
Change orders for decking and flashing
When tear-off finds rotted decking or a hidden layer, upload a change order and send it to the same homeowner. The original contract and each change stay as separate signed records.
Two owners, one record
Add a spouse, co-owner or landlord as a second signer. Both signatures and their times land on one finished PDF, which is what the insurer and the bank expect to see.
A record that holds up
Every document carries who signed, when and from which IP address, printed into the final PDF. If a homeowner disputes the decking charge in March, the signed change order answers it.
One flat price for the crew
Pro covers 3 people with unlimited documents for $288 a year, so the owner, the estimator and the office manager each send under their own name without paying per seat.
How to get a roofing contract signed
From inspection to signed PDF in a few minutes.
Upload your contract
Drag in the roofing contract, estimate or change order as a PDF, up to 20MB. Use the wording your lawyer and insurer already approved, with your state's notices included.
Add the homeowner
Enter the homeowner's name and email, and add a co-owner if two people must sign. SignSend places the signature block for you.
Send the link
Send the signing link from the driveway or the roof. The homeowner reads and signs on their phone, often before you pack the ladder.
File the signed copy
You receive the completed PDF and audit trail when the last person signs. Attach it to the job, send it to the adjuster with a supplement, and invoice against it.
SignSend vs roofing CRM software
A focused signing tool for your contracts, not a measuring, estimating and job tracking platform.
| What you are comparing | SignSend | Roofing CRM and proposal platforms |
|---|---|---|
| Starting price | One free document, then $49/mo flat Pro or $288/yr | Usually priced per user per month, often with onboarding fees |
| Aerial roof measurements | No | Yes in most products, sometimes billed per report |
| Good, better, best proposals from a price list | No, you upload your own PDF | Yes, the core of the product |
| Your own contract wording | Yes, any PDF | Usually the platform's proposal format |
| Signing from a phone link | Yes | Yes in most products |
| Setup time | Minutes | Days to weeks |
| Per-document fees | None | Varies by plan |
| Where a platform wins | It does not measure roofs, order materials or take payment | If you run a sales team and want one system for the whole business, a roofing CRM does more |
Competitor details reflect publicly listed plans and may change. Check each provider’s site for current pricing.
Who it's for
Residential reroof contractors
Get the replacement contract signed at the first visit and the decking change order signed on tear-off day.
Storm restoration crews
Keep the contract, the insurance terms and every supplement as separate signed records the adjuster can read.
Repair and maintenance roofers
Send a one-page work authorization for a leak, so the price is on file before anyone climbs.
Roofers who also do gutters and siding
Run every exterior contract through the same account at the same flat price.
Roofing contract questions
Is there software for roofing contracts?
Can a roofing contract be signed electronically?
Does the homeowner need an account to sign?
Can I send a change order after the roof is torn off?
How many roofing contracts can my crew send?
Does SignSend replace my roofing CRM?
Related guides
-
E-signature for construction
Subcontracts, change orders and lien waivers signed from the job site.
-
Change order e-signature
Approve added scope in writing before the work happens.
-
Electrical contractor contract software
Panel upgrade contracts and change orders signed on the customer's phone.
-
Plumbing contract software
Estimate approvals and replacement contracts signed before a wall is opened.
-
E-signatures for home services
Cooling-off rules and the paperwork home trades send.
-
Home inspection agreement software
Pre-inspection agreements signed before you arrive.
-
Tree service contract software
Tree removal contracts and rigging change orders signed on the customer's phone.