How it works Features Pricing Guides Start signing

Built for residential electricians, service shops and small electrical contractors

Electrical Contractor Contract Software for Electricians

Get the estimate approval, the panel upgrade contract and the change order signed on the customer's phone before you open a wall. Upload the PDFs you already use, add the customer, and keep a dated record of what they approved.

Try one document to see it work, then $49 a month or $288 a year billed yearly for up to 3 people.

New document Step 1 of 3
Upload a document to sign PDF, up to 20MB
1. Upload 2. Add signers 3. Send
TLS in transit. ESIGN Act and UETA. Free to try
$49/mo
Unlimited documents, flat rate
No account
Customers sign in the browser, nothing to install
ESIGN + UETA
Binding e-signatures on your own agreements
Audit trail
Signer, time, and IP on every document

Electrical contractor contract software lets an electrician send an estimate approval, service agreement or panel upgrade contract to a customer's phone and get a legally binding signature back the same day. You upload your own PDF, add the customer, and they sign from a text or email link. You get the signed copy and a dated audit trail, and nothing is printed, scanned or chased.

Electrical work is where scope grows fastest once the drywall is open. A 100 amp to 200 amp panel swap turns into a new meter base, the old wiring in the attic is cloth-sheathed, the kitchen remodel needs two more circuits than the quote assumed. Every one of those is a change, and the contractor with a signature on the change before the work happens gets paid without a conversation about what was agreed. SignSend charges a flat price for the signing step, so forty authorizations in a busy month cost the same as four.

What should an electrical contractor contract include?

An electrical contract goes wrong in a few predictable places, so write something for each. Describe the work in plain words (replace a 100 amp panel with a 200 amp panel and new meter base, not "electrical work"), list the equipment and brands you supply, and state the total price with how it is paid: deposit, progress payment, balance at final inspection. Say who pulls the permit and who pays the fee, and whether the price includes the utility disconnect and reconnect.

Then write down what you do not control. Knob-and-tube or aluminum branch wiring, an undersized service mast, a panel location that no longer meets clearance rules and inspector-required upgrades are the usual reasons a price moves. One sentence saying that conditions found after opening a wall are handled by a written change order, signed before the added work starts, protects both sides. Keep the whole document short enough to read on a phone, then send it with contract signing software that records the acceptance.

A worked example, a panel upgrade with one change order

Say a two-person shop quotes a 200 amp panel upgrade at $4,200 with a 30 percent deposit. The electrician sends the estimate PDF from the driveway, the homeowner signs at the kitchen table and the deposit invoice goes out the same hour. Two days in, the old service mast fails inspection and replacing it adds $780.

Without a paper trail that is a phone call and a memory contest. With a change order it is a one-page PDF for $780, signed on the homeowner's phone that evening, and the job ends with two separate signed records totaling $4,980. On Pro at $288 a year both documents cost nothing extra, and the owner can pull either one up when the inspector or the customer asks.

Can an electrical contract be signed electronically?

Yes. An estimate approval or service contract signed electronically is enforceable under the federal ESIGN Act and the state versions of the Uniform Electronic Transactions Act, as long as the customer intended to sign and you keep a record. The federal statute is 15 U.S.C. chapter 96. Contractor licensing, written-contract thresholds and required disclosures differ by state, so keep your state licensing board's requirements in the wording of your own forms.

One rule trade businesses miss is the cooling-off period. When you sell in the customer's home and the sale is $25 or more, the FTC Cooling-Off Rule (16 CFR part 429) requires a written notice of the three-day right to cancel, with certain emergency exceptions. Put that notice in the PDF you upload. SignSend signs and dates what you send. It does not write your contract or decide whether a state rule applies.

Residential electricians and commercial electrical contractors

A residential electrician mostly needs fast approvals from one or two homeowners on a phone. A commercial electrical contractor deals with general contractors, subcontract agreements, lien waivers and payment applications, usually from an office. SignSend handles both as PDFs, with a second signer and a signing order when a landlord and a tenant, or a GC and a sub, both have to sign. For the heavier subcontract and lien waiver paperwork, see e-signature for construction.

How does it compare with a field service platform?

Platforms such as Jobber, Housecall Pro and ServiceTitan bundle scheduling, price books, invoicing and card payments, and they price by technician or user. If you want one system for the whole business, they do more than a signing tool. Many one-truck and small shops keep a simple invoicing app and only need the contract signed properly, and for them a flat signing account is the cheaper piece. Compare what a team pays against seat-based tools in DocuSign for small business.

What an electrical contractor needs to get paperwork signed

Built around how an electrical job really goes, from a tripped breaker call to a full rewire, with a customer who wants a price and a start date.

Estimate and work authorization before you start

Send the written estimate with scope, materials, price and payment terms while you are still on site. The customer signs on a phone, so the approval is on file before the first wire is pulled.

Panel upgrade and service change contracts

Quote a panel replacement, a service upgrade or an EV charger circuit and send the contract with the amperage, permit responsibility, utility coordination and payment schedule. The signed copy is dated and stays on file.

Change orders when the job grows

When the wall opens and the wiring is worse than expected, upload a one-page change order and send it to the same customer. The original scope and the added work stay in separate signed records.

Customers sign on any phone

No app and no account. The homeowner, landlord or general contractor taps the link, reads the PDF and signs with a finger. Forward it to a second owner and both signatures land on one record.

A record that holds up

Every document carries who signed, when and from which IP address, printed into the final PDF. If a customer later says the price was different, you have their signature on the page they saw.

Flat price, no per-document fees

Pro is $288 a year for up to 3 people with unlimited documents. A storm week that triggers fifty repair authorizations costs the same as a quiet one.

How to get an electrical contract signed

From estimate to signed PDF in a few minutes.

01

Upload your contract

Drag in the estimate, service agreement or installation contract as a PDF, up to 20MB. Use the forms your insurer and lawyer already approved.

02

Add the customer

Enter the customer's name and email. Add a second signer if two owners or a landlord and a tenant must both agree. SignSend places the signature block for you.

03

Send the link

Text or email the signing link from the job site. The customer reads and signs from their phone, often before you finish measuring.

04

File the signed copy

You receive the completed PDF and audit trail when the last person signs. Attach it to the job record and invoice against it.

SignSend vs electrical contractor software

A focused signing tool for your agreements, not a dispatch and invoicing platform.

What you are comparing SignSend Electrical field service platforms
Starting price One free document, then $49/mo flat Pro or $288/yr Usually priced per technician or per office user, often with setup fees
Dispatch and GPS No Yes, the core of the product
Invoicing and card payments No Yes
Your own contract wording Yes, upload any PDF Often built-in templates
Signing from a phone link Yes Yes in most products
Setup time Minutes Days to weeks of data migration
Per-document fees None Varies by plan
Where a platform wins It does not dispatch, build price-book estimates or take payment If you want one system for the whole business, a field service platform does more than a signing tool

Competitor details reflect publicly listed plans and may change. Check each provider’s site for current pricing.

Who it's for

Service and repair electricians

Get the work authorization signed at the panel, so the price you quoted is the price on file before you open the wall.

Panel, service and EV charger installers

Send the equipment, permit and utility terms for an upgrade, then a change order if the old wiring fails inspection.

Remodel and rewire specialists

Authorize rough-in and finish as separate signed steps, so added circuits never turn into a billing dispute.

One-truck and two-truck shops

Run the whole signing process from a phone with no office software, and keep every signed job in one folder of PDFs.

Electrical contract questions

Is there software for electrical contractor contracts?
Yes. Field service platforms bundle estimates with dispatch and billing, and signing tools like SignSend handle just the contract. You upload your own PDF, send it to the customer's phone and get a signed copy with an audit trail. Pro is $288 a year for up to 3 people.
Can an electrical estimate be signed electronically?
Yes. Under the ESIGN Act and state UETA laws an electronic signature on an estimate or contract is as binding as ink when the customer intended to sign and a record is kept. Keep your state's contractor rules and any required cancellation notice in the document.
Does the customer need an account to sign?
No. The customer opens the link on any phone or computer, reads the document and signs. They do not create an account or install anything, and they are never charged.
Can I send a change order after the first contract?
Yes. Upload the change order as a new PDF and send it to the same customer. Each document has its own signed copy and audit trail, so the original scope and the added work stay separate.
How many contracts can my shop send?
Pro has no cap on documents for up to 3 people, and Business covers up to 10. There are no per-document fees, so a storm-season rush of authorizations costs the same as a quiet month.
Does SignSend replace my electrical job software?
No. It does not dispatch, quote from a price book or take payment. Keep that software and use SignSend to get the contract signed, then attach the signed PDF to the customer record.

Related guides